All Issue

2020 Vol.33, Issue 5 Preview Page

Research Paper


October 2020. pp. 339-349
Abstract


References
1 
Al-Rifaie, H., Sumelka, W. (2017) Numerical Analysis of Reaction Forces in Blast Resistant Gates, Struct. Eng. & Mech., 63(3), pp.347~359.
2 
Amadio, C., Bedon, C. (2014) FE Assessment of Dissipative Devices for the Blast Mitigation of Glazing Facades Supported by Prestress Cables, Struct. Eng. & Mech., 51(1), pp.141~162. 10.12989/sem.2014.51.1.141
3 
American Society of Civil Engineers (ASCE) (2011) Blast Protection of Buildings, ASCE/SEI 59-11, New York, U.S.
4 
Amiri, M.M., Yahyai, M. (2013) Estimation of Damping Ratio of TV Towers Based on Ambient Vibration Monitoring, Struct. Des. Tall & Spec. Build., 22, pp.862~875. 10.1002/tal.733
5 
Anderson, M., Dover, D. (2003) Lightweight, Blast Resistant Doors for Retrofit Protection Against the Terrorist Threat, 2nd International Conference on Innovation in Architecture Engineering and Construction, Loughborough University, UK, pp.23~33. 10.21236/ADA419496
6 
Andersson, S., Karlsson, H. (2012) Structural Response of Reinforced Concrete Beams Subjected to Explosion, Master Thesis, Chalmers University of Technology, Goteborg, Sweden.
7 
Bai, X., Zhu, L., Yu, T.X. (2017) Saturated Impulse for Pulse- loaded Rectangular Plates with Various Boundary Conditions, Thin-Walled Struct., 119, pp.166~177. 10.1016/j.tws.2017.03.030
8 
Cao, V.V., Ronagh, H.R., Ashraf, M., Baji, H. (2014) A New Damage Index for Reinforced Concrete Structures, Earthq. & Struct., 6(6), pp.581~609. 10.12989/eas.2014.6.6.581
9 
Chen, W., Hao, H. (2013) Numerical Simulations of Stiffened Multi-Arch Double-Layered Panels Subjected to Blast Loading, Int. J. Prot. Struct., 4(2), pp.163~188. 10.1260/2041-4196.4.2.163
10 
Choung, J.M., Shim, C.S., Kim, K.S. (2011) Plasticity and Fracture Behaviors of Marine Structural Steel, Part I: Theoretical Backgrounds of Strain Hardening and Rate Hardening, J. Ocean Eng. & Technol., 25(2), pp.134~144. 10.5574/KSOE.2011.25.2.134
11 
Conrath, E.J., Krauthammer, T., Marchand, K.A., Alakar, P.E. (1999) Structural Design for Physical Security; State of Practice, American Society of Civil Engineer, ASCE, Reston, VA.
12 
Cowper, G.R., Symonds, P.S. (1957) Strain Hardening and Strain Rate Effects in the Impact Loading of Cantilever Beams, Technical Report, No.C11-28, Brown University, U.S. 10.21236/AD0144762
13 
Crawford, J.E., Wu, Y., Choi, H.J., Magallanes, J.M., Lan, S. (2012) Use and Validation of the Release III K&C Concrete Material Model in LS-DYNA, Karagozian & Case Technical Report TR-11-36.5, California, U.S.
14 
Draganic, H., Varevac, D. (2018) Analysis of Blast Wave Parameters Depending on Air Mesh Size, Shock & Vibr., 2018, pp.1~18. 10.1155/2018/3157457
15 
Ergun, E., Gökkaya, I. (2016) The Effect of the Boundary Conditions on the Impact Behaviors of Stitched Composite Lap Joints, Adv. Compos. Lett., 25(1), pp.1~8. 10.1177/096369351602500101
16 
Friedlander, F.G. (1946) The Diffraction of Sound Pulses, I. Diffraction by A Semi-infinite Plate, Proc. Royal Soc. London A, 186(1006), pp.322~344. 10.1098/rspa.1946.0046 20998736
17 
Huang, X., Ma, G.W., Li, J.C. (2010) Damage Assessment of Reinforced Concrete Structural Elements Subjected to Blast Load, Int. J. Prot. Struct., 1(1), pp. 103~124. 10.1260/2041-4196.1.1.103
18 
Hyde, D.W. (1988) User's Guide for Microcomputer Programs CONWEP and FUNPRO, Department of the Army, Mississippi, U.S.
19 
Kim, N.H., Park, K.J., Lee, K.O. (2016) A Study on Structural Stability of Blast Door by Blast Pressure, J. Korean Soc. Saf., 31(3), pp.8~15. 10.14346/JKOSOS.2016.31.3.8
20 
Kim, S.B., Baik, S.H., Lee, J.H., Min, A.S., Koh, Y.C. (2016) Three Companies Producing CBR Facilities; Explosion Test on the Six Blast-Resistant Doors, Institute of HwaRangDae.
21 
Koh, C.G., Ang, K.K., Chan, P.F. (2003) Dynamic Analysis of Shell Structures with Application to Blast Resistant Doors, Shock & Vib., 10(4), pp.269~279. 10.1155/2003/357969
22 
Kristensson, R., Carlsson, M. (2012) Structural Response with Regard to Explosions - Mode Superposition, Damping and Curtailment, Master Thesis, Lund University, Lund, Sweden.
23 
Kuda, F.N., Ucak, S., Osmancikli, G., Türker, T., Bayraktar, A. (2015) Estimation of Damping Ratios of Steel Structures by Operational Modal Analysis Method, J. Construct. Steel Res., 112, pp.61~68. 10.1016/j.jcsr.2015.04.019
24 
Liao, J.J. (2017) A Novel Offshore Platform Blast Wall Design with Energy Absorption Mechanism, Master Thesis, University of Western Australia.
25 
Livermore Software Technology Corporation (LSTC) (2017) LS- DYNA S/W and User's Manuals.
26 
Luo, X., Qian, X., Zhao, H., Huang, P. (2012) Simulation Analysis on Structure Safety of Refuge Chamber Door under Explosion Load, Proc. Eng., 45, pp.923~929. 10.1016/j.proeng.2012.08.260
27 
Malver, L.J., Ross, C.A. (1998) Review of Strain Rate Effects for Concrete in Tension, ACI Mater. J., 95(6), pp.735~739. 10.14359/418
28 
Moon, J.H., Shin, H.S., You, Y.J., Kim, W.W., Kim, S.W. (2019) Development of Protective Structure Applied with High- Performance Fiber Reinforced Cementitious Composites, Final Report, Korea Institute of Civil Engineering and Building Technology(KICT).
29 
Nam, J.W., Kim, H.J., Kim, S.B., Byun, K.J. (2007) HFPB Analysis of Concrete Wall Structure Subjected to Blast Loads, J. Korean Soc. Civil Eng., 27(3), pp.433~442.
30 
National Emergency Management Agency (NEMA) (2008) A Study on the Standards and Utilization Plan of CBR Facilities, Policy Research Report, Republic of Korea.
31 
Protective Design Center (PDC) (2008) Single Degree of Freedom Structural Response Limits for Anti-Terrorism Design, PDC TR-06-08, Omaha, NE: U.S. Army Corps of Engineers.
32 
Rezaei, S.H.C. (2011) Response of Reinforced Concrete Elements to High-Velocity Impact Load, PhD Thesis, Purdue University, West Lafayette, Indiana, U.S.
33 
Ross, C.A., Tedesco, J.W., Kuennen, S.T. (1995) Effects of Strain Rate on Concrete Strength, ACI Mater. J., 92(1), pp.37~47. 10.14359/1175
34 
Shim, K.B., Lee, J.Y., Lee, J.H., Seong, Y.S., Lee, T.S. (2018) Performance Evaluation and Structural Proposal of Sliding Door under Explosive Load, Proceeding of Annual Conference, The Korean Society of Mechanical Engineering, pp.24~29.
35 
Shin, H.S., Kim, W.W., Kim, S.W., Moon, J.H. (2019a) Design Sensitivity Analysis of a Steel-Concrete Double-leaf Blast- resistant Door to Determine the Steel Ratio, J. Korean Soc. Hazard Mitig., 19(4), pp.165~177. 10.9798/KOSHAM.2019.19.4.165
36 
Shin, H.S., Kim, W.W., Park, G.J., Lee, N.K., Moon, J.H., Kim, S.W. (2019b) FE Analysis on the Structural Behavior of the Single-leaf Blast-Resistant Door According to Design Parameter Variation, J. Korea Acad. Ind. Cooper. Soc., 20(11), pp.259~272.
37 
Standards Australia (2011) Australian/New Zealand Standards, Structural Design Actions - Part 2, Wind Actions, AS/NZS 1170.2:2011; Standards Australia: Sydney, Australia.
38 
Tavakoli, H.R., Kiakojouri, F. (2014) Numerical Dynamic Analysis of Stiffened Plates under Blast Loading, Lat. Am. J. Solids & Struct., 11(2), pp.185~199. 10.1590/S1679-78252014000200003
39 
U.S. Department of Defense (U.S. DoD) (2008) Unified Facilities Criteria; Structures to Resist the Effects of Accidental Explosions, UFC 3-340-02.
40 
Veeredhi, L.S.B., Rao, R. (2015) Studies on the Impact of Explosion on Blast Resistant Stiffened Door Structures, J. Inst. Eng., 96(1), pp.11~20. 10.1007/s40030-014-0103-x
41 
Wang, Y., Zhai, X., Yan, J., Ying, W., Wang, W. (2018) Experimental, Numerical and Analytical Studies on the Aluminum Foam Filled Energy Absorption Connectors under Impact Loading, Thin-Walled Struct., 131, pp.566~576. 10.1016/j.tws.2018.07.056
42 
Yang, K.H., Chung, H.S. (2001) The Shear Behavior of Reinforced High-Strength Concrete Deep Beams Without Shear Reinforcement, J. Archi. Inst. Korea, Struct & Constr., 17(11), pp.11~18.
43 
Zhang, X., Zhao, X., Zhang, Y., Li, Z. (2012) A One-Point Quadrature Element Used in Simulation of Cold Ring Rolling Process, Materials Science Forum, Vols.704/705, Trans Tech Publications, Switzerland, pp.165~171. 10.4028/www.scientific.net/MSF.704-705.165
44 
Zhu, L., He, X., Chen, F.L., Bai, X. (2017) Effects of the Strain Rate Sensitivity and Strain Hardening on the Saturated Impulse of Plates, Lat. Am. J. Solids & Struct., 14, pp.1273~1292. 10.1590/1679-78253664
Information
  • Publisher :Computational Structural Engineering Institute of Korea
  • Publisher(Ko) :한국전산구조공학회
  • Journal Title :Journal of the Computational Structural Engineering Institute of Korea
  • Journal Title(Ko) :한국전산구조공학회 논문집
  • Volume : 33
  • No :5
  • Pages :339-349
  • Received Date :2020. 09. 14
  • Revised Date :2020. 09. 22
  • Accepted Date : 2020. 09. 23