All Issue

2020 Vol.33, Issue 5 Preview Page

Research Paper


October 2020. pp. 311-318
Abstract


References
1 
ABAQUS, Version 6.14 (2016) Online Documentation Help, Theory Manual: Dassault Systemes.
2 
Gajewskia, M., Szczerbab, R., Jemiołoa, S. (2015) Modelling of Elastomeric Bearings with Application of Yeoh Hyperelastic Material Model, Procedia Eng., 111, pp.220~227. 10.1016/j.proeng.2015.07.080
3 
Hu, X.-Z., Wittmann, F.H. (1992) Fracture Energy and Fracture Process Zone, Mater. & Struct., 25, pp.319~326. 10.1007/BF02472590
4 
Keum, D.H., Noh, P.S., Kim, J.U. (1994) A Study on the Improvement of Earthquake Resistant Design Code, Archit. Inst. Korea, pp.435~440.
5 
Khelifa, M., Oudjene, M., Khennanec, A. (2007) Fracture in Sheet Metal Forming: Effect of Ductile Damage Evolution, Comput. & Struct., 85(3- 4), pp.205~212. 10.1016/j.compstruc.2006.08.053
6 
Kim, J.S., Jung, J.P., Moon, J.H., Lee, T.H., Kim, J.H., Han, T.S. (2019) Seismic Fragility Analysis of Base-Isolated LNG Storage Tank for Selecting Optimum Friction Material of Friction Pendulum System, Earthq. & Tsunami, 13(2), p.28. 10.1142/S1793431119500106
7 
KS F 4420 (2018) Steel-Laminated Elastomeric Bearings for Bridge.
8 
Lee, K.K., Kim, H.D., Choi, S.M. (2017) Major Revision of Material Part of Design Standards for Structural Steel Buildings According to change of KS, Maga. & J. Korean Soc. Steel Constr., 29(5), pp.7~11.
9 
Priestley, M.J.N. (2000) Performance based Seismic Design, New Zealand Soc. Earthq. Eng., 33(3), pp.325~346. 10.5459/bnzsee.33.3.325-346
10 
Prior, A.M. (1994) Applications of Implicit and Explicit Finite Element Techniques to Metal Forming, Mater. Proc. Technol., 45(1-4), pp.649~656. 10.1016/0924-0136(94)90413-8
11 
Ruzicka, J., Spaniel, M., Prantl, A., Dzugan, J., Kuzelka, J., Moravec, M. (2013) Identification of Ductile Damage Parameters in the Abaqus, Bull. Appl. Mech., 9, p.89.
12 
Sarva, S.S., Deschanel, S., Boyce, M.C., Chen, W. (2007) Stress- Strain Behavior of a Polyurea and a Polyurethane from Low to High Strain Rates, Polymer, 48(8), pp.2208~2213. 10.1016/j.polymer.2007.02.058
13 
Shahzad, M., Kamran, A., Siddiqui, M.Z., Farhan, M. (2015) Mechanical Characterization and FE Modelling of a Hyperelastic Material, Mater. Res., 18(5), pp.918~924. 10.1590/1516-1439.320414
14 
Sun, J.S., Lee, K.H., Lee, H.P. (2000) Comparison of implicit and explicit finite element methods for dynamic problems, Mater. Proc. Technol., 105(1-2), pp.110~118. 10.1016/S0924-0136(00)00580-X
Information
  • Publisher :Computational Structural Engineering Institute of Korea
  • Publisher(Ko) :한국전산구조공학회
  • Journal Title :Journal of the Computational Structural Engineering Institute of Korea
  • Journal Title(Ko) :한국전산구조공학회 논문집
  • Volume : 33
  • No :5
  • Pages :311-318
  • Received Date :2020. 06. 03
  • Revised Date :2020. 07. 08
  • Accepted Date : 2020. 07. 15